The price of $400.00 includes the Blazer with a front mounted, vertical ASA, (gun body and ASA are both HARD anodized black), and 10.5" brass barrel. (optional clear anodizing of the main body available for a lighter, Smoke colored finish) The main body is mounted on top of a pivoting trigger grip frame with PPS molded grips. Also included in the package is a comprehensive owners manual and owner registration card, barrel plug, tools, lubricant, a Palmer's Pursuit Shop patch and a one year warranty.

The highly refined pneumation (Pneumatic Automation) system for the Blazer is an integral part of the one-piece aluminum body that brings a new meaning to "state of the art." The Blazer is a high performance paintgun for the high performance player in a very compact, lightweight package that is setting new standards. This system provides consistent, closed-bolt firing that is "blazing" fast, very user friendly and versatile. The Blazer will readily accept either common CO2 or regulated pressure (600 +/- psi suggested) N2/HPA systems in either, remote or on-gun arrangements.

An easy to install, QuikPoint, Back-bottle adapter kit, with convenient velocity adjuster is also available. This back bottle setup is specially angled to provide adequate clearance for the face and mask while maximizing balance and maneuverability for natural point ability that is incredible. Conventional "bottom line" setup hardware is also available in kit form. Either kit can be factory installed, free of charge, if ordered with the purchase of the Blazer. The Blazer only weighs two (2) pounds and is only 15.5 inches over-all with the standard 10.5 inch brass barrel.

Available options: (subject to changes)

Barrel options
	Up grade to 12" barrel add				$15.00
	Spiral venting add				$32.00
	Nickel plating, matte (ext. only) add				$25.00
	"Matched" to a specific gun			add	$20.00
QuikPoint back-bottle kit (complete)					$41.00
LAPCO bottom-line (complete)					$36.00
	with gas-thru vert. foregrip				$72.00
Stabilizer regulator system
	Female (bottom-line) (complete)				$109.00
	with gas-thru vert. oregrip				$145.00
	Male/Vertical w/LAPCO bottom line				$125.00
Gas Thru vertical foregrip (contoured)					$30.00
With In-line quick disconnect add .......					$10.00
Anti-siphon tanks (set to gun)					$55.00
(complete) = hardware, fittings, hose/tubing, adapters
and fasteners as needed for standard, finished installation)
Specialty and Custom setups:
HV/LP Valving ,

or High Volume/Low Pressure firing				$40.00
ProTouch triggering setup
(the "personal" touch)				$80.00
Two-Finger trigger (trigger guard removed)				$50.00
Two-Finger/ProTouch trigger package				$120.00
Carbon Fiber Grip Frame			add	$40.00
Custom		Blazer Barrels
(Precision smooth bore Brass, from 8-12")
Brass				$30.00
Brass Vented				$62.00
Nickel platted matte (ext. only)				$55.00
Nickel platted and Vented				$87.00
Multi-Barrel Kit
	Includes;
	1-8" Barrel
	1-12" Vented Barrel
	Barrel Pouch			$95.00
With nickel platted barrels(ext. only)add				$40.00
Nickel Highlights
On Gun				$50.00
On Accessories (Stabilizer, LB Kit, ect.)				$25.00

GLENN PALMER aka PALADIN
POG # 1
Palmer's Pursuit Shop
3951 Development Dr.
Suite #3
Sacramento, CA. 95838
Ph. (916) 923-9676
fax (916) 923-9674
Glenn@palmer-pursuit.com

pog site design and contents Copyright pog members